Raise and lower your rear end at the touch of a button. Add air pressure to improve ride quality during changing road conditions or while hauling added weight. Also improving the ride quality is a "pre-set factory" dampening valve. At approximately 150 psi, the bike will be fully raised and the suspension will be resting on its piston bumpers at *maximum ride height*. After that your height will not change, but you can continue to increase air pressure for improved riding during cornering or with a passenger.
The SAS is super easy to install and comes complete with mounting instructions. There's no compressor to mount, no pressure hoses to run, no fittings to fail...All you have to do is replace your old shocks with a new SAS unit and wire an on/off switch directly to the battery. The biggest advantage to the SAS vs. "old style" compressor suspension units is that there are no hoses to run...Hoses that after a while get invisible pin holes causing your suspension to leak. It may be hours or days to track down one of these pin holes, but you'll never have that problem with CCCS' new SAS System. You won't have to remove your EPA canisters to make room for an ugly compressor so you'll always be legal. Fits all softail Harley-Davidson's, as well as custom production bikes. Its water-resistant design is perfect for those inclement weather rides and they are manufactured right here in the USA.
MSRP-$1,395.00 Dealer cost-$1,116.00. Once any dealer buys 3 units total, the dealer price falls from $1,116.00 to only $1,032.00 per unit. As an added incentive, all dealers buying 2 or more at the same time will pay ONLY $1,000.00 per SAS unit.
For those interested in obtaining more information on Custom Cycle Control Systems new SAS system, you can reach them at 866-438-2129, or 702-438-2129. Check them out online at www.customcyclecontrols.com or email them at firstname.lastname@example.org.